Gather Your Equipment

Ensure you have all of the components below:

Step 1: Get Comfortable

• Find a comfy spot to sit or lie down
• Use a recliner or zero gravity chair for extra comfort

Step 2: Setup the Boot

• Plug the Hose Splitter into the Pump Machine
• Connect Leg Hoses to Leg Sleeves
• Connect Hose Splitter to Leg Hoses

⚠️ Note: Match arrows on connectors. Push all 6 leg sleeve connectors in securely.

Step 3: Choose Your Settings

• Set Pressure, Session Duration, and Mode
• Explore 6 Modes in the manual 

Pro Tip: Try 20-30 mins & 100 mmGh for your first time.

Step 4: Put On the Boots

• Sit or lie down
• Slide legs into sleeves
• Ensure heels are at the bottom and boots fit snugly around your thighs

Pro-Tip: Position your legs in a slightly elevated manner for added circulatory benefits.

Step 5: Start and Relax

• Press the On button to start
• Boots inflate and deflate based on Mode
• Enjoy!

Cycle Done:

When it beeps, turn off machine, unzip sleeves, gently disconnect tubes, and roll sleeves from feet up to release air.

Your legs' new best friend has arrived-enjoy the journey!